cleaning aluminum gasket surfaces » Max Gray Racing Parts

Aluminum Gasket

Posted in Uncategorized by admin on November 30, 2008

Aluminum Gasket

Tips for Buying a Used Boat

So you decided to jump in and buy yourself a boat. Congratulations on your decision but before your give them a bag full of cash there are a few things you must do. A proper inspection of the various components and parts of the boat will save you from many hassles, multiple repairs and wasted money.

When Buying Used Boats, always consider the source of the boat or the parties involved. If you buy a boat from a private party it usually will not come with any type of guarantee or warranty. Buying a boat from a reputable boat dealer typically will come with a warranty and they might even service it for free for a period of time. If you buy a used boat from an online auction site such as Ebay, always make sure that the seller has excellent feedback above 96%.

Properly inspecting the boat is the number one way to safeguard your hard earned money. First remember that this is a used boat and will have some normal wear and tear involved. Look it over carefully and start inspecting the Hull. Look for different colored paint or recently new paint. Look for signs of previous accidents. If you find an area on the hull which looks different than the rest, inspect it more carefully. The best way is by listening carefully as you tap it lightly with a small rubber hammer. What you are listening for is anything which sounds different than the normal solid sound.

Used Boat Motors can either be in very good condition or some can end up being real lemons. Ask the seller if they have any invoices or a record of the boat repairs done on the engine. The best way to test the boat motor is to start it up and hopefully drive the boat around a little. Let the throttle out and see how it responds. While the engine is shutoff do a propeller test by turning it. When turning the propeller, what you are looking for is any type of warping or wobbling. Visually inspect the propeller for any gashes, nicks or chips. Look for any oil or fluid leaks around the gaskets. Look at the mounts on the engine to see if they are in good condition or broken. Inspect any hoses or belts and look to see if they are dried, cracked or worn out. If you are not mechanically inclined then it is best to have a mechanic look the engine over and do a compression check.

Once you have inspected the main parts of the boat the next thing is to inspect the secondary parts. Check any bolted areas or outlets for problems or rust. Search around the cabin areas and open all the cabinets. Look over the upholstery to see the condition of it and if the stitches are intact. Look for any ripped, worn out or mildewed upholstery. If you find several problems or do not feel comfortable with something than maybe you should pass on it and search for another boat.

When buying a large priced item such as a car or a boat, make sure to properly inspect the areas which receive the most wear and tear. The hull, engine and other components must be looked over and tested. A boat will be one of the most expensive purchases you will make so do not be afraid to take your time. Buying a boat from a reputable seller and properly inspecting it will not only save you from needless repairs but will keep you from being stranded on the water.

About the Author

Mark Ralph is a prolific author and operates a Boating Information website. He is the President of a Marketing & Consulting Firm. For Used Boats, click: http://www.Wholesale-Boats.com and a Top Source for Buying Boat Motors and For the Best Used Bass Boats!

Honda-Tech: How to Remove tough gaskets